316L Tube Shield ET Wear Shield

Durable Boiler Tube Protection

Premium 316l stainless steel tube shields provide exceptional erosion and corrosion resistance for boiler tubes, extending service life and reducing maintenance costs in harsh industrial environments.

Tube Shield Wear Shield 316L Boiler Tube Protection Stainless Steel Erosion Shield +2 More

316L Tube Shield ET Wear Shield

Durable Boiler Tube Protection

Tube Shield Wear Shield 316L Boiler Tube Protection Stainless Steel Erosion Shield +2 More

The 316L Tube Shield ET Wear Shield is a high-quality protective sleeve made from low-carbon 316L stainless steel, engineered specifically for the protection of boiler tubes and industrial piping against severe erosion, corrosion, and mechanical wear. This wear shield is designed to withstand harsh operating conditions in power generation, chemical processing, and marine industries where tubes face constant exposure to acidic flue gases, moisture, and abrasive particles.

Featuring superior resistance to chloride-induced pitting and crevice corrosion due to its molybdenum-enriched composition, the 316L stainless steel shield ensures reliable protection under continuous high-temperature service, typically up to 870°C (1600°F). Its robust design is available in multiple forms such as U-shaped half sleeves and fully enclosed tube shields, facilitating easy installation by welding or clamp methods.

By deploying these wear shields, industries can significantly extend the operational lifespan of boiler tubes and process pipes, minimizing downtime and maintenance costs. This solution addresses the critical need for corrosion resistant tube protection in environments prone to acid attack and erosive wear.

Stainless Steel 316 / 316L / 316H Overview

316/316L stainless steel is widely used in chloride and chemical process environments due to its enhanced resistance to corrosion and pitting, attributed to its molybdenum content. These alloys offer excellent mechanical and corrosion-resistant properties across a range of temperatures and environments, making them essential in chemical processing, marine, and high-temperature industrial applications.

316L

Low carbon version of 316, offering superior resistance to intergranular corrosion after welding. Commonly used in marine and chloride-rich environments. Excellent weldability without post-weld annealing.

316H

High carbon content variant suitable for elevated temperature service. Offers greater short and long-term creep strength. Commonly used in high-stress boiler or furnace applications.

316

Standard molybdenum-bearing austenitic stainless steel. Excellent resistance to chlorides and moderate acids. Widely used across various chemical and process industries.

Chemical composition (wt%) of Stainless Steel 316 and 316L.
Grade	316	316L
UNS	S31600	S31603
Carbon (C) Max.	0.08	0.030
Manganese (Mn) Max.	2.00	2.00
Phosphorus (P) Max.	0.045	0.045
Sulfur (S) Max.	0.030	0.030
Silicon (Si) Max.	1.00	1.00
Chromium (Cr)	16.0–18.0	16.0–18.0
Nickel (Ni)	10.0–14.0	10.0–14.0
Molybdenum (Mo)	2.0–3.0	2.0–3.0
Iron (Fe)	Balance

Chemical composition details for 316 and 316L stainless steels used in corrosion-resistant applications.

Mechanical properties of Stainless Steel 316 and 316L sheets.
Material	Form	Tensile Strength (ksi)	Yield Strength (ksi)	Elongation (%)	Hardness (HB)
Alloy 316L	Sheet AMS 5507	100 max	-	45	-
Alloy 316	Sheet AMS 5524	75 min	30	45	207 max

Typical mechanical properties for 316 and 316L stainless steel sheets used in industrial applications.

Electrical properties of 316/316L stainless steel.
Electrical Resistivity	Magnetic Permeability
7.2e-005 ohm-cm	1.008
1.16e-004 at 650°C	RT

Electrical resistivity and magnetic permeability values at room and elevated temperatures.

Physical and mechanical properties
Alloy	UNS	Tensile (MPa)	Yield (MPa)	Elongation (%)	Hardness
316	S31600	515	205	35	90 Rb
316L	S31603	485	170	-	90 Rb

Physical and mechanical properties comparison for 316 and 316L stainless steels.

316L is preferred when welding thick sections is necessary and when resistance to intergranular corrosion is critical. 316H is used for elevated temperature pressure services.